Phonic MU 2442X
- 8 entrées micro/line avec inserts
- 4 voies stéréos avec équalisation
- 10 Preamplis micro
- Equaliseur 3 bandes
- DFX, processeur de multi-effet numérique de 24 morceaux(de bit) avec 16 programmes plus un contrôle de paramètre principal, découvre le contrôle et le de commutateur de pied
- Filtre de coupe basse de 75 Hz sur canaux mono
- 4 Auxiliaires, Auxiliaires 1 et 2 avec Pre/Post switch
- 4 retours auxiliaires stéréo, 2 avec effets directs
- Protection sur 4 canaux mono pour traiter des signaux difficiles
- Mini entrée-sortie de stéréo et entrée-sortie chacune de RCA stéréo avec la commande d\'équilibre
- Alimentation Fantôme
- Bouton Mono sur les sorties L/R principales
- Quatre sous-groupes avec commutateurs de cheminement principal L et R, sorties double-transportées
- Productions directes pour enregistrement de multi-piste
- Ecoutes individuelles,
- Sorties de commande avec matrice à entrées multiples de source
- REC avec la commande d\'équilibre pour l\'assortiment de niveau d\'enregistrement
- Alimentation d\'énergie intégrée de commutation avec le connecteur universel, 100-240 VAC, 50/60 Hz
- Poids : 6.6 kgs
Phonic Powerpod K12 Plus
• 2 x 500W / 4 bridgeable and patchable power amplifiers
• Dual effect processor, each containing 100 effects, tap delay and test tones
• 4 AUX sends, where AUX 2 can be set to pre or post fader
• 8 Mic/Line input channels with 3-band swept mid-range EQ and insert; including a total of 8 mic preamps
• High-efficiency switching power supply for achieving high power and light weight
• Foot switch allows user to on/mute effect processor and tap delay control
• Individual +48V phantom power switches
• 2 stereo input channels with both 1/4\" and RCA inputs
• Stereo 10-band graphic EQ
• One professional speaker connector and two 1/4” TS phone jacks on each power amplifier channel for speaker connection
• Stand-by feature allow users to mute all microphone channels
• Handle integranted into casing
• Mono output with low pass filter, variable frequency from 60Hz to 160Hz
• Molded protective cover to help avoid scratching of the mixer face
• Product Dimensions:0.790 x 1.920 x 2.300 (ft)
PHONIC POWERPOD K-16 PLUS
POWERPOD K-16 PLUS
• 2 x 500 Watt / 4 ohm power amplifier, bridgeable and patchable
• 12 Mic preamps
• 12 Mic/Line input channels with 3-band swept mid-range EQ, low cut and inserts
• 2 stereo input channels with 3-band EQ, each includes stereo RCA inputs
• Stereo returns, each can be routed to aux 1 & 2 sends (effect to monitor)
• Stereo 7-band graphic EQ with feedback detection system
• Solid Phonic System speaker enhancement and Vocal Eliminator for Karaoke
• Dual effect processors, each with 100 effects, tap delay and test tone generator
• 4 Aux sends, aux 2 can be set to pre or post fader
• +48V individual phantom power switches
• Mono output with variable low pass filter from 60 Hz up to 160 Hz
• Zone 2 output for side fill or another PA system
• Mini stereo phone jacks and RCA jacks for tape in and record output
• One professional speaker connector and two 1/4” phone jacks per channels for speaker connection
• Molded protective cover to avoid scratch surface and handle integrated into chassis